Sorry for the post delay folks. Yesterday the roof was completely framed and this morning the plywood was being nailed on. The insulation crew should be able to insulate the roof now. John Booe is presently back on site to finish up some remaining metal work that will allow for the completion of the interior [...]
The rain has stopped, the sun is out, and there is already a lot of action at the job site. Augustine and Alejandro were back up on the roof setting trusses while Will finished fastening the interior walls. Dave was also on site this morning to supervise the truss setting, keep everyone in the flow, [...]
Today’s weather is not the most pleasant, but Will and Venansio are still able to continue the wood framing of the upstairs living area. I would guess that they will finish most of the framing today and be ready to set windows soon. Even though it might be hard to notice, a lot has [...]
Thursday proved to be very productive! By the end of the day, John had collars in all of the upper rough openings. This allowed Will and Venansio to knock out a good part of the wood framing that will support the interior finished wall. The wood framing is slightly modified from conventional stick framing designs [...]
With plenty of material on site, beautiful weather, and a highly motivated crew the ISBU’s will take on another whole look by the end of the day. John Booe is back on site to attach collars to all of the rough openings, address deck band details, and finish sealing/reinforcing exterior shell. These metal working tasks [...]
John Booe did show up today and there was much progress made on the metal working end of the project. The inside walls of the upper boxes are now welded to the open ends which brings the ISBU a step closer to being completely “dried in”. John also spent some time flushing up or leveling [...]
Today we hope to see John Booe of johnnyboxes show up in the high country to frame in for our windows and doors. This has been a topic of debate for some time now as no one wants any leaks, but many have different ideas about how best to prevent such. John has been modifying [...]
Any questions, comments, or input can now not only be posted here on this blog, but can also be sent to info@dwellbox.com
by the way…….no work again on this sunny monday…..no welder. We need to finish with the metal work before any work with wood can happen……
http://www.brewgreen.com/
http://www.172willtbaird.com/
www.johnnyboxes.com
props to Andy and Dirk as well!!
http://www.bluemountainmetalworks.com/
